Installation Steps

Internet should be available on the machine where the application is being installed and connections on port 9242 should be allowed in the network firewall to carry out the installation steps.

All the commands start with a # indicating that root user privileges are required to execute these commands. Trailing # is not a part of the command.

There are two types of installation 1. EFCX and 2. Cisco (UCCX & UCCE). As for EFCX most of the steps are not required as Keycloak, JtapiConnector, Active Mq, Mixer are not required for EFCX.

Allow ports in the firewall

If there is an active firewall, allow the following ports.

443/tcp
444/tcp
8088/tcp
5060/tcp (only for Cisco)
16386-32768/udp (only for Cisco)

Installation Steps

Please make sure that Solution Prerequisites are met for the desired deployment type.
Download the deployment script and place it in the user’s home or any desired directory. This script will:
1. delete the recording-solution directory if it exists.
2. clone the required files for deployment
To execute the script, give it the execute permissions and execute it. This command will clone the skeleton project for the recording solution. the recording-solution directory contains all the required files for deployment.
$ chmod 755 deployment.sh $ ./deployment.sh
Follow step 5 to 8 for deployment with Cisco UCCX or UCCE
Follow this guide to install Recorder v1.10.10. The recording path should be /usr/local/freeswitch/cucmRecording
Once recorder is installed successfully, go for the configuration.
Follow this guide to create an application user on CUCM for jtapi-connector.
Open recording-solution/docker/config.env and update the environment variables given below.

	Name	Description

	Name	Description
1	VRS_URL	URL of a local machine. example, https: //192.168.1.101 *
2	LOCAL_MACHINE_IP	Local machine IP since it is a non-HA deployment. example 192.168.1.101 *
3	KC_HOSTNAME	Keycloak hostname where keycloak is hosted. e.g 192.168.1.101
4	TZ	Time Zone. e.g Asia/Karachi
5	FINESSE_URL	https: //uccx12-5p.ucce.ipcc:8445
6	DIRECTORY_PATH_TO_MONITOR	The path for archival process to monitor, it should be the same path where sessions are kept. e.g /usr/share/freeswitch/cucmRecording/sessions/
7	ARCHIVED_MEDIA_FILES_EXTENSION	mp4 [keep it same]
8	FILE_EXTENSION	wav [keep it same]
9	NO_OF_DAYS	No of days before which all the files will be archived. If set 2, then except for last 2 days from the date and time of service started or triggered all the files will be archived.
10	SFTP_HOST	SFTP host IP for archival e.g 192.168.1.106
11	SFTP_PORT	22
12	SFTP_USERNAME	Username of the SFTP server e.g expertflow
13	SFTP_PASSWORD	SFTP password e.g Expertflow464
14	ARCHIVAL_JOB_INTERVAL	It is a duration that tells the service to trigger again. This value is in hours. For example, if set 24 the service would be triggered after 24 hrs to get the desired job done.
15	STEAM_DELETION_JOB_INTERVAL_HRS	Time in hours before which all the stream is to be deleted. e.g 24
16	RETRY_LIMIT	limit to retry in case the connection fails. e.g 2
17	ARCHIVAL_PROCESS_NODE	active
18	NO_OF_DEL_DAYS	No of days before which all the streams will be deleted. If set 2, then except for last 2 days from the date and time of service started or triggered all the files will be deleted.
19	CISCO_TYPE	Either UCCE or UCCX
20	ACTIVEMQ_BROKER_URL	Connection URL to Consumer as a Broker e.g`tcp://192.168.1.101:61616`
21	ACTIVEMQ_URL	Connection URL for ActiveMQ `tcp://192.168.1.101:61616?broker.persistent=true&broker.schedulerSupport=true`
22	ACTIVEMQ_USER	UserName for the ActiveMQ service i.e admin
23	ACTIVEMQ_PASSWORD	Password for the ActiveMQ service i.e admin
24	CUCM_APPLICATION_USER_NAME	CUCM User's username that has been created in step 3.
25	CUCM_APPLICATION_USER_PASSWORD	Password for the CUCM Application User.
26	CUCM_IP	IP address where CUCM has been Deployed
27	DEPLOYMENT_PROFILE	Profile that we want to use for backend “CISCO” or “EFCX“

Below Env variables are only for UCCX

	Name	Description

	Name	Description
1	CCX_PRIMARY_IP	Primary UCCX IP address. e.g 192.168.1.33
2	CCX_SECONDARY_IP	Secondary UCCX IP e.g 192.168.1.33
3	CCX_ADMIN_USERNAME	CCX Admin username
4	CCX_ADMIN_PASSWORD	CCX Admin password

Below Env variables are only for UCCE

	Name	Description

	Name	Description
1	UCCE_IP	UCCE IP
2	UCCE_DATABASE	UCCE awdb database name
3	UCCE_USERNAME	UCCE awdb database user’s username
4	UCCE_PASSWORD	UCCE awdb database user’s password

Navigate to the recording solution directory and execute the following commands:
chmod 755 install-cisco.sh chmod 755 install-efcx.sh #for UCCX and UCCE run ./install-cisco.sh
Verify all the containers are up and healthy
Verify if the keycloak container is healthy (docker ps), if it is on restarting, kill (docker kill keycloak) and remove (docker rm keycloak) the keycloak container then run ./install.sh. Wait for keycloak container to become healthy.
Set up keycloak
Once keycloak is set up for Cisco and for EFCX it is already setup, add the below environment variables accordingly in the recording-solution/docker/config.env file.

	Names	For EFCX	For Cisco

	Names	For EFCX	For Cisco
1	KEYCLOAK_REALM_NAME	Realm name from EFCX keycloak	Realm name created in step 4 of keycloak setup
2	KEYCLOAK_CLIENT_ID	KeyCloak client id from EFCX keycloak	Keycloak client id from step 6 of keycloak setup
3	KEYCLOAK_CLIENT_SECRET	Add the client secret from EFCX keycloak	keycloak client secret from step 8 of keycloak setup
4	KEYCLOAK_PERMISSION_GROUP	AGENT_GROUP	AGENT_GROUP
5	KEYCLOAK_URL	FQDN of CX	-
6	EFCX_FQDN (Only for EFCX)	FQDN of CX	-
7	DEPLOYMENT_PROFILE	“EFCX“	“CISCO”
8	VRS_URL	Url of VRS machine with port 444. IP/Url:444	Url of VRS machine with port 443
9	LOCAL_MACHINE_IP	IP of the local machine with port 444	IP of the local machine with port 444

Update the Database environment variables in config.env (Only for EFCX) .These variables are builtin in case of UCCE or UCCX

	Name	Description

	Name	Description
1	DB_DRIVER	Driver on which database is running i.e postgres or mysql drive
2	DB_ENGINE	Engine on which database is running i.e postgres or mysql
3	DB_HOST	Name or ip of the host on which database is active
4	DB_NAME	Name of the database (fetch from config.conf on this path /etc/fusionpbx/)
5	DB_USER	Username for database (fetch from config.conf on this path /etc/fusionpbx/)
6	DB_PASSWORD	Password for the database (fetch from config.conf on this path /etc/fusionpbx/)

To update the self-signed certificates for VRS, get the public authority or domain signed certificate .crt and .key files, name them server.crt and server.key, and replace the files in /recording-solution/config/certificates with these two new files. Names should be the same.
Run ./install-efcx.sh for EFCX Or run ./install-cisco.sh for Cisco UCCX and UCCE.
Run the following command to ensure all the components are running.
# docker ps
In case of Cisco go to https : //VRS-IP/#/login to access the application, whereas for EFCX go to https://VRS-IP:444/#/login.
Configure the SIP trunk to enable CUCM to send SIP events to VRS for call recordings. Two sip trunks should be configured in case of HA. (Not for EFCX)

*Nginx service is running on port 443 in case of UCCX or UCCE, and for EFCX it is running on port 444.

Voice Recording Solution

(14.3.1) Installation steps

Installation Steps