(13.5) Deployment Guide

Solution Prerequisites

Installation Steps

The Internet should be available on the machine where the application is being installed and connections on port 9242 should be allowed in the network firewall to carry out the installation steps. All the commands start with a # indicating that root user privileges are required to execute these commands. Trailing # is not a part of the command.

Allow ports in the firewall

For internal communication of the docker swarm, you'll need to allow communication (both inbound and outbound) on the ports: 8083/tcp,8084/tcp , 8085/tcp, 8086/tcp, 8087/tcp, 8844/tcp, 8834/tcp, 8443/tcp and 443/tcp.

To start the firewall on CentOS (if it isn't started already), execute the following commands. You'll have to execute these commands on all the cluster machines.:

systemctl enable firewalld
systemctl start firewalld

To allow the ports on CentOS firewall, you can execute the following commands. You'll have to execute these commands on all the cluster machines.

firewall-cmd --add-port=8083/tcp --permanent
firewall-cmd --add-port=8084/tcp --permanent
firewall-cmd --add-port=8085/tcp --permanent
firewall-cmd --add-port=8086/tcp --permanent
firewall-cmd --add-port=8087/tcp --permanent
firewall-cmd --add-port=8844/tcp --permanent
firewall-cmd --add-port=8834/tcp --permanent
firewall-cmd --add-port=8443/tcp --permanent
firewall-cmd --add-port=443/tcp --permanent
firewall-cmd --reload

Configure Log Rotation

Add the following lines in /etc/docker/daemon.json file (create the file if not there already) and restart the docker daemon using systemctl restart docker. Perform this step on all the machines in the cluster in case of HA deployment.

{
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "50m",
    "max-file": "3"
  }
}

Creating Databases

Create a database for UMM and Supervisor Tools services in the MSSQL server with suitable names and follow the application installation steps.

Installing Application

Download the deployment script . This script will:
1. delete the supervisor-tools-deployment directory in the present working directory if it exists.
2. clone the supervisor-tools-deployment repository from GitLab in the present working directory.
To execute the script, give it the execute permissions and execute it.
chmod +x supervisor-tools-deployment.sh ./supervisor-tools-deployment.sh
For UCCE customers only, execute the following command
rm /root/supervisor-tools-deployment/docker/config/umm/permissions/tam.json
For UCCX customers only, uncomment the lines 71 - 81 from file /root/supervisor-tools-deployment/docker/docker-compose.yml
It should looks like
tam: image: gitlab.expertflow.com:9242/supervisor-tools/team-administration:13.2.1 ports: - "8082:8080" env_file: - ${PWD}/docker/environment-variables/environment-variables.env restart: always volumes: - ${PWD}/docker/trustStore:/usr/local/trustStore networks: - st
Update environment variables in the following files inside /supervisor-tools-deployment/docker/environment_variables folder.
1. Update UMM environment variables in the umm-environment-variables.env file.
2. Update Supervisor Tools Environment variables in the environment-variables.env. See also, Caller Lists Environment Variables to specify variables of the Caller Lists microservice.
Get domain/CA signed SSL certificates for SupervisorTools FQDN/CN and place the files in /root/supervisor-tools-deployment/docker/certificates folder. The file names should be server.crt and server.key.
Copy the supervisor-tools-deployment directory to the second machine for HA. Execute below command
scp -r supervisor-tools-deployment root@machine-ip:~/
Go to the second machine and update the environment variables where necessary.
Execute the following commands inside /root/supervisor-tools-deployment directory on both machines.
chmod 755 install.sh ./install.sh
Run the following command to ensure that all the components are up and running. The screenshot below shows a sample response for a standalone non-HA deployment.
docker ps

Note: All machines and virtual IP should be on the same subnet for HA testing.

Virtual IP configuration

Repeat the following steps for all the machines in the HA cluster.

Download keepalived.sh script and place it in /root the directory.
Give execute permission and execute the script:
chmod +x keepalived.sh ./keepalived.sh
Configure keep.env file inside /root/keep-alived folder
Update the SERVER_URL in /supervisor-tools-deployment/docker/environment_variables to hold Virtual IP for front-end.
Give the execute permission and execute the script on both machine.
chmod +x keep-command.sh ./keep-command.sh

Finesse Gadget Deployment

SMBv2 Commands:

Following are the commands to enable and disable SMBv1 and SMBv2 on the SMB server component.

Detect if SMB1 enabled
Get-SmbServerConfiguration | Select EnableSMB1Protocol
Enable SMB1
Set-SmbServerConfiguration -EnableSMB1Protocol $true
Disable SMB1
Set-SmbServerConfiguration -EnableSMB1Protocol $false
Detect if SMB2 enabled
Get-SmbServerConfiguration | Select EnableSMB2Protocol
Enable SMB2
Set-SmbServerConfiguration -EnableSMB2Protocol $true
Disable SMB2
Set-SmbServerConfiguration -EnableSMB2Protocol $false

For more info you can check:How to detect, enable and disable SMBv1, SMBv2, and SMBv3 in Windows

Adding License

Browse to http://<MACHINE_IP or FQDN>/umm in your browser (FQDN will be the domain name assigned to the IP/VIP).
Click on the red warning icon on right, paste the license in the field and click save.

Supervisor Tools