Skip to end of metadata
  • Created by Former user, last modified by Former user on Jun 09, 2023
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Introduction

This document illustrates the procedure and steps to deploy Expertflow Generic Connector on any Kubernetes distribution (K3s or RKE2).


Step 1: Clone the Experflow Generic Connector Repository

1. Start with cloning the repository from GitLab.

git clone https://gitlab.expertflow.com/cti/gc_k3s_deployment.git

2. Change to the directory.

cd gc_k3s_deployment\cti-voice

Step 2: Create Namespace

1. Run the following command on the master node. Create the namespace using the command.

kubectl create namespace <namespace>

Step 3: Image Pull Secret

1. For the expertflow namespace, use the following command:

  • kubectl apply -f cti-voice/ConfigMaps/
  • kubectl apply -f cti-voice/Deployments/
  • kubectl apply -f cti-voice/Services/
  • kubectl apply -f cti-voice/Ingress/

Step 4: Update the FQDN

1. Decide the FQDN to be used in your solution and change the <FQDN> to your actual FQDN as given in the following command:

sed -i 's/devops[0-9]*.ef.com/<FQDN>/g' cti-voice/Ingresses/nginx/ gc-connector/Ingresses/traefik/*


Run this command for RKE

  • kubectl apply -f cti-voice/Ingresses/nginx

Run this command for Traefik

  • kubectl apply -f cti-voice/Ingresses/traefik






  • No labels