Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Hardware Sizing

For a simplex (single server) deployment, minimum and recommended hardware requirements are as following:


Minimum

Recommended

vCPU

2 Cores

4 Cores

vRAM

4 GB

8 GB

vDisk

20 GB

500 GB

For a redundant deployment, two servers of the same specifications (as mentioned above) are needed.

Software Requirement

Microsoft Windows Server 2012 standard Edition x64 R2

A Windows Server 2012 R2 64-bit or above is recommended

Locale Settings

English (recommended)

Java Runtime (64 bit)

Java Runtime (JRE) 8 is required

Antivirus

Any of the antivirus as mentioned in Software License Requirements

WinRAR

A package extractor to modify embedded configuration properties

.Net Framework

.Net Framework 4.5.2 for Service Manager

Browser Requirement

Port Utilization

Following ports should remain open on the Firewall. The local security policy and any antivirus should also allow open communication on the following ports:

Type

Source Host

Source Port

Destination Host

Destination Port

TCP

<Client Application>

any

EF Connector

61616/61614

TCP

EF Connector (B)

any

EF Connector

61616/61614

HTTP

For status monitoring from any machine

EF Connector

8162

XMPP

EF Connector

any

Cisco Finesse

5222, 5223, 7071, 7443

HTTP/S

EF Connector

any

Cisco Finesse

80, 8080, 443, 8443

NTP

EF Connector

any

NTP Server

123

DNS

EF Connector

any

DNS Server

53

  • <Client Application> is a machine running client application of EF Connector. For server based applications like Siebel, it’s Siebel Communication Server. For desktop based applications, it’s the machine address of the agent desktop running the desktop application.

  • In a redundant deployment, both EF Connector instances communicate with each other on the same TCP OpenWIre port 61616. In the table above, it’s mentioned as EF Connector (B) ⇒ EF Connector. 

  • These are defaults set in EF Connector, but you can always change the default configuration.

If you need to file sharing and remote installation / configuration using RDP, you might need to open the following additional ports:


Type

Source Host

Source Port

Destination Host

Destination Port

RDP

For remote desktop connection

EF Connector

3389

TCP

For file-sharing

EF Connector

139,445

UDP

For file-sharing

EF Connector

137,138

System Access Requirements

  • Administrative access (LocalSystem account or domain administrator) on the Connector Server is required to do the installation and configuration.

Time Synchronization Requirements

An important consideration is time synchronization between related components. Communication between EF Connector, client applications and Cisco Finesse carry timestamps. If the system dates and time are not synchronized the system can produce unpredictable results. Therefore, please make every effort to adhere to the following time synchronization guidelines:

EF Connector, client applications and Cisco Finesse should have their Time Zone and time configured properly according to the geographic region and synchronized. To configure the time zone, please see the instructions from the hardware or software manufacturer of NTP server. Client applications and EF Connector should be synchronized to the second. This synchronization should be maintained continuously and validated on a regular basis. For security reasons, Network Time Protocol (NTP) V 4.1+ is recommended.