Pre-Requisite
Voice Recording Solution should be deployed on a Server.
An SFTP server is required which is same as where VRS is deployed.
This SFTP server must be configured for the root user.
Deployment of Screen Recording Service
For screen recording service follow the following sections:
A) SFTP server configuration
Configure SFTP on VRS server on root user.
Note the SFTP root password.
Note the SFTP IP Address.
B) Finesse Server
Deploy the SRC Gadget on the finesses server using this guide:
...
Need to deploy screen-recording gadget.
...
Gadget file to deployed is
.View file name FinessesGadget.zip Login to the UCCX Administration. Cisco U
From menu bar open Subsystems → Rmcm → Teams
Open your team and add the Agents (on which recording enabled) in the Assigned Resources Section.
C) Agent Computer
Download the Screen Recording executable file from here.
View file name Controller.exe Download
file.View file name config.ps1 Make a directory Folder named as 'Service' in C:\ and place all three both files in it.
Open the command prompt and add following environment variables from table1Table given in step 5.
To add variables use 'SET <Environment Variable> = setx “<Environment Variable>” <Value>' from Table 1.Open powershell as administrator the following Table.
Environment Variables | Value |
|---|---|
AGENT_HOST | localhost |
SFTP_IP | The IP address of the SFTP server, which is the same as the one where VRS is deployed |
SFTP_ROOT_PASSWORD | Password of the SFTP Server |
Once done, close the command prompt and reopen. Verify that environment variables are saved by running the following command:
echo %<Environment Variable>%
Open PowerShell as Administrator and run the following commands on any path:
Set-ExecutionPolicy RemoteSigned -Scope CurrentUserSet-ExecutionPolicy Unrestricted -Scope CurrentUser
A message will appear. Write yes and press enter.
In
...
PowerShell navigate to C:\Service\ and then run .\config.ps1
...
Go to the C Drive where the Service folder is located, and manually run
Controller.exe
...
by double
...
-clicking it.
Open the
...
Browser and
...
access this
...
URL http://localhost:8000 . A page would open indicating that service is running fine.
...
Open the Sftp server and login to sftp server
...
Make a test call
...
Now, make a test call. Upon transferring the file to the SFTP server, a folder named screen_recording will automatically be created in the root directory
Access the server via SSH and log in to the SFTP server.
Go to the
/screen_recordingDirectory on the SFTP server and Verify if your recording is being saved.Download and Play the video manually
...
Make a test call and check the front end (front end yet to be made)
Table 1
Environment Variables | Value |
|---|---|
AGENT_HOST | IP or FQDN of the Agent Machine |
SFTP_IP | IP address of the SFTP server. Same as where VRS is deployed. |
SFTP_USERNAME | Username of the SFTP username |
SFTP_PASSWORD | Password of the SFTP server |
REMOTE_PATH | Path on SFTP server where VRS is deployed where the Video files are being saved must be. must be /example. |
Finesse Server
Deploy the gadget in the finesses server using this guide
...
...
Gadget file to deployed is
| View file | ||
|---|---|---|
|
...
Open you UCCX server and login
...
From menu bar open Subsystems → Rmcm → Teams
...
.
https://<SFTP_IP>/vrs/recording/screen/<filename.extension>
Login to the VRS Application and Verify that screen recording is being saved. (front end yet to be made)