...
Follow this guide to create an application user on CUCM for jtapi-connector.
Open
recoding-solution/docker/config.envand set the environment variables.
Name | Description | |
|---|---|---|
| 1 | VRS_URL | URL of a local machine. exampleIP Address of Server at which solution is being deployed, https: //192.168.1.101 * |
| 2 | LOCAL_MACHINE_IP | Local machine IP since it is a non-HA deploymentSame IP Address as given in VRS_URL. example 192.168.1.101 * |
| 3 | KC_HOSTNAME | Keycloak hostname where keycloak is hosted. e.g 192.168.1.101 |
| 4 | TZ | Time Zone. e.g Asia/Karachi |
| 5 | DEPLOYMENT_PROFILE | “CISCO“ as HA is only available on cisco |
| 6 | PEER_ADDRESS | Address of the second VM wehre VRS is deployed |
| 7 | HA_MODE | Keep it true. As we are deploying high avaliability |
| 8 | SCREEN_RECORDING | True if screen recording is enables and false if diasble |
| 9 | KEYCLOAK_URL | Url of the keycloak deployed for fetching user details |
| 10 | CISCO_TYPE | Either UCCE or UCCX |
| 11 | FINESSE_URL | https: //uccx12-5p.ucce.ipcc:8445 |
| 12 | DIRECTORY_PATH_TO_MONITOR | The path for archival process to monitor, it should be the same path where sessions are kept. e.g /var/vrs/recodings/cucmRecording/sessions/ |
| 13 | ARCHIVED_MEDIA_FILES_EXTENSION | mp4 [keep it same] |
| 14 | FILE_EXTENSION | wav [keep it same] |
| 15 | NO_OF_DAYS | No of days before which all the files will be archived. If set 2, then except for last 2 days from the date and time of service started or triggered all the files will be archived. |
| 16 | SFTP_HOST | SFTP host IP for archival e.g 192.168.1.106 |
| 17 | SFTP_PORT | 22 |
| 18 | SFTP_USERNAME | Username of the SFTP server e.g expertflow |
| 19 | SFTP_PASSWORD | SFTP password e.g Expertflow464 |
| 20 | ARCHIVAL_JOB_INTERVAL | It is a duration that tells the service to trigger again. This value is in hours. For example, if set 24 the service would be triggered after 24 hrs to get the desired job done. |
| 21 | STEAM_DELETION_JOB_INTERVAL_HRS | Time in hours before which all the stream is to be deleted. e.g 24 |
| 22 | RETRY_LIMIT | limit to retry in case the connection fails. e.g 2 |
| 23 | ARCHIVAL_PROCESS_NODE | active |
| 24 | NO_OF_DEL_DAYS | No of days before which all the streams will be deleted. If set 2, then except for last 2 days from the date and time of service started or triggered all the files will be deleted. |
| 25 | CUCM_APPLICATION_USER_NAME | CUCM User's username that has been created in step 3. |
| 26 | CUCM_APPLICATION_USER_PASSWORD | Password for the CUCM Application User. |
| 27 | CUCM_IP | IP address where CUCM has been Deployed |
...
Name | Description | |
|---|---|---|
1 | DB_DRIVER | Driver on which database is running i.e postgres or mysql drive |
2 | DB_ENGINE | Engine on which database is running i.e postgres or mysql |
3 | DB_HOST | Name or ip of the host on which database is active |
4 | DB_NAME | Name of the database |
5 | DB_USER | Username for database |
6 | DB_PASSWORD | Password for the database |
7 | DB_PORT | Port of the Database |
Change the recording path and other variables as per your configuration.
Navigate to HA directory inside recording-solution directory.
Open keep.env file and set values to environment variables
Code Block KEEPALIVED_UNICAST_PEERS=192.168.1.126 (IP address of the Second VRS) KEEPALIVED_VIRTUAL_IPS=192.168.1.245 (Assign any IP-Address which not in use) KEEPALIVED_PRIORITY=100 (Assign 100 for priority 1 and 90 for priority 2)
...
Code Block KEEPALIVED_INTERFACE=ens160 (Find you interface card. ens160 or ens 192 or anyother)
Now run this script type ./keep-alive.sh
Change the recording path and other variables as per your configuration.
Open docker-compose-cisco in docker/docker-compose-cisco
...